Paintless Dent Elimination

Thanks to sophisticated methods and the accessibility of new tools developed to provide precision results, many garages now provide a service called paintless damage removal. Unlike conventional panel pounding, paintless dent elimination is achieved without damaging the existing paint on the metal, and can provide excellent results at a fraction of the expense of other techniques of dent elimination.

The trick behind paintless dent repair is that instead of being an aggressive technique of straightening out damages in the metal, it is a gradual procedure more comparable to a massage than a piece of standard metal work.

A panel beater will remove the panel from your automobile and then use a mallet and a former to bash out any flaws. The outcomes of panel whipping are generally outstanding, and can leave a cars and truck looking as excellent as new.

Like panel beating, paintless damage repair work is an extremely knowledgeable procedure, and to get the best results it takes a great deal of perseverance, plenty of experience, and obviously the right tools. The actual method of removing damages does not require the removal of the panel from the car, or certainly removal of any trim to allow access to the back of the metal in order to press out the damage from behind.

The real technique used for paintless damage removal will vary somewhat depending on location on the vehicle the repair work is being performed, however the necessary method remains the same. Basically, the repair work guy will utilize special tools on the reverse of the panel to correct any dents. This is done by gradually pushing the metal back into place in small areas. It is a slow process, however it can have outstanding results when carried out effectively. Due to the fact that the work is done in situ, and the paint is not harmed by the hammering, and all the work is carried out on the rear of the panel, the job is normally performed on a single day, since no paint requires to dry once the job is done.

Particular paintless damage elimination tools are needed in order to perform the work properly. A full set of tools will permit a proficient operator to carry out a repair on any panel on the vehicle. The paintless dent removal tools are created to provide access into panels from small gaps such as the window slot in the top of a door. They are typically long and flat, in order to slide into place, and extremely rigid to allow pressure to be used to the metal without deforming the tool.

The operator will slide the long flat tool into the space behind the panel and after that expertly guide it to the dent. The next phase of the process is to gradually push the metal back into place from behind, slowly massaging the metal into its initial shape a little at a time in order to reduce the shock to the panel, and to get rid of any possible damage to the paintwork on the other side of the panel.

The repair will gradually bring back the panel to its original shape, and will deliver results almost as good as standard panel beating, although at a much lower cost, thanks to the truth that no repainting will be required at the end of the task to fix the damage that is triggered when the panel is being corrected.

For little dents and small damage to the panels of any automobile, paintless damage elimination is an extremely recommended option to traditional techniques, and thanks to its lower expense, and quick conclusion it uses outstanding worth and benefit when carried out by a specialist who can provide you with the best outcomes thanks to his substantial experience and training.

A panel beater will eliminate the panel from your car and then use a mallet and a previous to slam out any defects. The real method used for paintless dent removal will vary somewhat depending on location on the car the repair is being carried out, however the necessary technique stays the same. Generally, the repair work guy will use special tools on the reverse of the panel to align out any damages. The paintless damage elimination tools are developed to use access into panels from little gaps such as the window slot in the top of a door.